Water-based Steel Structure Coatings

Specifications

20kg

Coverage Rate

6–14 m²/kg

Minimum Order Quantity

100kg

Application Scenarios

1. Steel Structures in Buildings: Steel frame structures for high-rise buildings, factories, warehouses, stadiums, airport terminals, etc.

2. Bridges and Transportation Facilities: Various bridges, tunnel supports, highway guardrails, traffic signs, etc.

3. Machinery and Equipment Supports: Metal components such as machinery housings, conveying equipment, pipelines, storage tanks, and supporting structures.

4. Industrial Facilities: Power plants, petrochemical plants, port machinery, metallurgical equipment, and other environments requiring corrosion resistance.

5. Warehousing and Logistics Facilities: Surface protection for steel racks, warehouse beams and columns, and other metal components.

Application Instructions

1. Surface Treatment: The steel structure surface must be thoroughly cleaned of rust, oil, and dust. Sandblasting or mechanical grinding can be used to ensure cleanliness and dryness.

2. Primer Application: Apply a layer of water-based anti-rust primer to enhance adhesion and corrosion resistance.

3. Topcoat Application: After the primer dries, apply two coats of water-based steel structure topcoat.

4. Drying and Curing: Surface drying time is approximately 30 minutes, and complete drying time is 4-6 hours (depending on temperature and humidity). The interval between coats should be ≥2 hours.

Advantages

1. Environmentally friendly and non-toxic, low VOC emissions: Uses water as a diluent, odorless, non-flammable and non-explosive.
2. Excellent anti-corrosion and anti-rust performance: Forms a dense coating layer that effectively blocks oxygen and moisture, preventing oxidation and corrosion of metal surfaces.
3. Excellent weather resistance and aging resistance: Can withstand ultraviolet rays, acid rain, and high temperature and humidity for a long time, maintaining the gloss and color stability of the paint film.
4. Strong adhesion and not easy to peel off: The coating adheres firmly to the steel surface, is impact-resistant and vibration-resistant, and is not easy to crack or peel off.
5. Good chemical resistance: Resistant to corrosion from acids, alkalis, salt spray, oil stains and other chemicals, suitable for complex industrial environments.